- 6Other Useful features
Basic Concepts
- Creating the DOSBox folder on Chrome OS. If you're on a Chromebook, you'll have to create the folder inside your Downloads folder, because that's the only directory that both Chrome and Android.
- This is a DOSBox Port of Windows ME that includes a full install of Microsoft Office 2000 as well as Half-Life and a few other apps. This port utilizes a custom build of DOSBox Megabuild 6 + Glide patch from gulikoza, therefore hardware acceleration does work for some 3Dfx Glide enabled games.
- Windows 95 image under dosbox. However, as always there are some difficulties, and these are really dire. I installed directx 6 with some success, the setup advised me to keep the current (working) sb 16 drivers and NOT to install the directx ones. After this i tried to install a video game. There is no way to assign a.image.
DOSBox is an emulator that recreates a MS-DOS compatible environment (complete with Sound, Input, Graphics and even basic networking). This environment is complete enough to run many classic MS-DOS games completely unmodified. Gaggia gelatiera ice cream maker instruction manual. In order to utilize all of DOSBox's features you need to first understand some basic concepts about the MS-DOS environment.
- Connectivity (Modems/Networking)
Hello, Thanks to the wonderful guide by dada, I was able to install a well-running copy of Windows 95 in DOSBox 0.74. However, the guide does not enable mounting CD images, and the 'standard' ways of mounting CD-ROMs with the builtin DOSBox commands don't work (i.e. They don't show up in Windows 95).
Installation
The first step is to install DOSBox. This guide will use the 0.74 Windows 32-bit version which is available for download. Download the release for your operating system. If you are a Windows user, get the Win32 installer.
After downloading, install DOSBox to any directory. Also, make a folder to put all your old games in. I put DOSBox in C:DOSBox, and my old games directory is C:OLDGAMES. I put a game in my OLDGAMES directory, TESTDRIV, which is Test Drive, an old racing game. Your directories should look like this:
Running a game
Now, the hardest part, getting games to run. First, run dosbox.exe in your DOSBox folder. Remember that OLDGAMES directory you created in Step 1? You have to basically set that as new directory just for DOSBox. Essentially, it's going to become the C:> drive of DOSBox. So, type:
To dissect the above:
- MOUNT: Tells the program to mount a directory
- C: Tells the program what you want your new drive to be called (leaving it as C: is fine)
- C:OLDGAMES: This is the directory I want to set as the new drive for DOSBox, because all my games are in it. If you created a different directory, write in the directory you created.
(Note: If you want to mount a CD-ROM instead of a folder, type this:
(Note: 'cdrom' is case sensitive and must be lowercase!)
In this example, D: -T cdrom tells DOSBox that my D: drive is a CD-ROM drive, and the first D, tells DOSBox what my new drive name should be called. If you are running your game off a CD-ROM then make sure to use D: in place of C: in the following examples. You can find instructions on how to mount other devices, such as floppy drives, in the mount section).
After you've done this, you will be prompted with a Z:>. Now, just write what you wanted to call your new DOSBox drive, which as I said above, we called C. To navigate to that newly mounted drive just type in:
Hopefully, you're all set! Now, it's time to run the game. Previously I had mentioned a game called TESTDRIV in my OLDGAMES folder. I now want DOSBox to go to that folder. So type in:
That's it! CD stands for 'Change Directory', so you've changed the directory to TESTDRIV. You can find instructions on how to use the Change Directory command, in the CD section of the Commands article.
Hello, Thanks to the wonderful guide by dada, I was able to install a well-running copy of Windows 95 in DOSBox 0.74. However, the guide does not enable mounting CD images, and the 'standard' ways of mounting CD-ROMs with the builtin DOSBox commands don't work (i.e. They don't show up in Windows 95).
Installation
The first step is to install DOSBox. This guide will use the 0.74 Windows 32-bit version which is available for download. Download the release for your operating system. If you are a Windows user, get the Win32 installer.
After downloading, install DOSBox to any directory. Also, make a folder to put all your old games in. I put DOSBox in C:DOSBox, and my old games directory is C:OLDGAMES. I put a game in my OLDGAMES directory, TESTDRIV, which is Test Drive, an old racing game. Your directories should look like this:
Running a game
Now, the hardest part, getting games to run. First, run dosbox.exe in your DOSBox folder. Remember that OLDGAMES directory you created in Step 1? You have to basically set that as new directory just for DOSBox. Essentially, it's going to become the C:> drive of DOSBox. So, type:
To dissect the above:
- MOUNT: Tells the program to mount a directory
- C: Tells the program what you want your new drive to be called (leaving it as C: is fine)
- C:OLDGAMES: This is the directory I want to set as the new drive for DOSBox, because all my games are in it. If you created a different directory, write in the directory you created.
(Note: If you want to mount a CD-ROM instead of a folder, type this:
(Note: 'cdrom' is case sensitive and must be lowercase!)
In this example, D: -T cdrom tells DOSBox that my D: drive is a CD-ROM drive, and the first D, tells DOSBox what my new drive name should be called. If you are running your game off a CD-ROM then make sure to use D: in place of C: in the following examples. You can find instructions on how to mount other devices, such as floppy drives, in the mount section).
After you've done this, you will be prompted with a Z:>. Now, just write what you wanted to call your new DOSBox drive, which as I said above, we called C. To navigate to that newly mounted drive just type in:
Hopefully, you're all set! Now, it's time to run the game. Previously I had mentioned a game called TESTDRIV in my OLDGAMES folder. I now want DOSBox to go to that folder. So type in:
That's it! CD stands for 'Change Directory', so you've changed the directory to TESTDRIV. You can find instructions on how to use the Change Directory command, in the CD section of the Commands article.
One more step, running the game! Most games have an EXE file in their directory that you can run. However, some might require a BAT file, or COM file (common in demos and really old games). Most of the time, the file is in the root folder. Please consult the documentation of your game for which file is needed to start the game. In the case of Test Drive, it's TDCGA.EXE. So now, I just type this:
Install Windows 2000 Dosbox Android Version
That's it! Here's a picture of all of the commands I've written about in Step 2:
Alternate methods for running a game
The steps described above are closely aligned with how DOS Based operating systems behave natively. However modern operating system allow for more user friendly (although less authentic) ways of playing your favorite games. If the steps above seem tedious or confusing you can try some of these other guides. In most cases these guides will still require you to setup a working DOSBox environment.
- Creating desktop shortcuts
NOTE: If you have problems with launching the game, unrecognizable errors being spit out, saving settings, or having the game drop out while running it, one thing to try is to make sure all the files are not set to Read Only. In Windows, select the folder of the game, right click and hit properties, uncheck Read Only if it is checked, and apply to all sub folders.
Install Windows 2000 Dosbox Android Emulator
If you have other errors, please search the forums first before posting a question.
Performance
Yay, you've gotten your game to run! But maybe you're experiencing slowdown? How do you fix this? With the following commands:
CTRL+F7 = Decreases frameskip
CTRL+F8 = Increases Frameskip
CTRL+F11 = Slows down the game
CTRL+F12 = Speeds up the game
Press CTRL+ALT+DEL to open the Task Manager, and click the Performance tab. Start by pressing CTRL+F12 until your CPU Usage level begins to go above 95%. After that, if you still need a performance boost, hit CTRL+F8 to have DOSBox not render some frames. The console window will display all of the changes you've made, and the top of the game window will display the current settings. Adjust these settings as needed until your game goes smoothly. Please keep in mind that not all games will run smoothly on DOSBox.
Other Useful features
Quick Start for Windows
Windows users have an option of dragging the EXE of their DOS game onto the DOSBox program (or shorcut pointing to the DOSBox program). This will automatically start the game. If this doesn't work, then I would recommend reading the rest of this article.
Automatically Mounting Your DOS Games folder
Dosbox Install Game
You can save yourself some time by having DOSBox automatically MOUNT your folders and change the drive to C:. In original DOS based operating systems a file called AUTOEXEC.BAT contained any commands that the user wanted executed every time the computer booted up. This functionality is simulated by the [autoexec] section of the dosbox.conf file.
Install Windows 2000 Dosbox Android Download
For DOSBox versions older than 0.73 browse into program installation folder and open the dosbox.conf file in any text editor. For version 0.73 go to Start Menu and click on 'Configuration' and then 'Edit Configuration'. Then scroll down to the very end, and add these lines:
Now those commands will be executed automatically when starting! If you're having trouble with that, make sure it looks like this (look at the bottom):
Dosbox Windows 7 Download
Full Screen
Just press ALT+ENTER to go into and out of full screen.
Alternatively, you can open the dosbox.conf file as mentioned above and change 'fullscreen=false' to 'fullscreen=true'. DOSBox will then run in full screen mode when you open it.
How To Install Windows 2000
